| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Online |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Road shot blasting machine is a good solution to the problem of road slippage, this machinery can be smooth road surface hairline treatment, is to make the road surface roughness increase, and then increase the friction between the vehicle and the road surface, so that the vehicle in the process of driving, to prevent skidding, so in some accident-prone sections, or in some of the turning road, you can use this machinery on the ground for the hairline treatment, not only can prevent road slippage, but also slow down the speed of vehicles. Can prevent the road surface slippery, but also can slow down the speed of the vehicle, so you can well avoid the occurrence of traffic accidents.
Road shot blasting machine is a mechanical method of shot (steel shot or sand) at a very high speed and a certain angle to the work surface, so that the shot impact on the surface of the road surface, after shot blasting road surface clean and hard, there is a relatively uniform texture to make the surface uniformly rough, at the same time, dust collector generated by the negative pressure of the shot and cleaned down the impurities such as dust recycling. After airflow cleaning, the intact pellets will be automatically recycled, and impurities and dust will fall into the dust collection box. Dust-free and pollution-free construction can be achieved, which not only improves the efficiency, but also protects the environment.
| Shot blasting wheel diameter | 200 mm | ||
| Working width | 270 mm | ||
| Walking speed | 0.5~20 m/min | ||
| Concrete surface cleaning efficiency | ≥180 m2/h | ||
| Steel surface cleaning efficiency | 15-25 m2/h | ||
| Dust removal connecting pipe diameter | 120 mm | ||
| Recommended steel shot diameter | 1.2-1.5 mm | ||
| Steel shot consumption | 10 g/m2 | ||
| Power | 11kw+0.5kw | ||
| Size | 1000mm*300mm*1100mm | ||
| Weight | 150 kgs | ||
| Type | Blast cleaning range(mm) | Blast motor power(kW) | Cleaning efficiency | |
| Concrete(m²/h) | steel plate(m²/h) | |||
| JR200 | 200 | 7.5 | 150 | 12-20 |
| JR270 | 270 | 11 | 180 | 15-25 |
| JR350 | 350 | 15 | 280 | 60-80 |
| JR550 | 550 | 2×11 | 400 | 75-100 |
| JR850 | 850 | 2×15 | 600 | 100-160 |
1. Simple operation and preparation, clean up and evacuate at any time.
2. It adopts many advanced electrical regulation technologies such as frequency conversion speed control, PLC control, phase sequence protection, text display, etc. to ensure the accurate realization of each function.
3, according to the different conditions of the road surface to set the cleaning speed, steel shot supply, pulse blowing time cycle, dust cartridge cleaning interval time, etc., through the combination of parameter adjustment, to achieve the desired cleaning effect.
4. Wide working width and high efficiency.
5. the whole construction process is dust-free and pollution-free, which is conducive to environmental protection and the health of construction workers. 6. the construction basically does not damage the road surface structure. 7. the pulse automatic blowback dust removal system is a good solution to the problem of dust removal.
7. Pulse automatic blowback dust removal, can realize continuous work.
8. The steel shot is automatically circulated inside the equipment, with very low consumption.
9. The structure of the whole machine is reasonable, quick disassembly, convenient maintenance and replacement of wearing parts.
10. with vacuum cleaner, work can be achieved without dust or dust effect, to protect the health of the operator.
){kind=link}